Wireless Key Telephone Handset
- 26 -
Base Unit
The Dip Switches are used to de-register one, or both, handsets form the base unit. To
de-register a handset, it must be idle.
De-register All Handsets
To remove power form the base unit, unplug port 1
Reposition the dip switches as follows – Place switches 1 and 2 in the up position
(Off) and switches 3 in the down position (On).
Re-plug port on into the base unit to restore power. During the de-registration
process the LED on the base unit will flash at a unique rate; 125 milliseconds on,
125 milliseconds off. The de-registration process will take approximately five (5)
seconds.
When the process is complete, remove power from the base unit by unplugging
port 1. Place the dipswitches back into the “Normal Operation” mode, by placing
all switches up or off position.
De-register Individual Handsets
To remove power form the base unit, unplug port 1
Reposition the dip switches as follows:
Handset 1
– Place switches 1 and 2 in the down position (On) and switch
3 in the up position (Off).
Handset 2
– Place switch 1 in the down position (On) and switches 2 and
3 in the up position (Off).
De-register
Handset
1
De-register
Handset
2
Re-plug port on into the base unit to restore power. During the de-registration
process the LED on the base unit will flash at a unique rate; 125 milliseconds on,
125 milliseconds off. The de-registration process will take approximately five (5)
seconds.
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
