Xblitz RF200, Руководство пользователя

Страница: 28 / 60

28
08. REMOTE CONTROL FEATURES
1. Press the POWER button to turn the paired device on/o .
2. When the paired device is turned on:
a. Press the +/- buttons to change volume,
b. press |<< or >>| to choose the previous/next track,
c. press the MUTE button to mute the paired device. Pressing the button again
will unmute the device,
d. press the EQ button to use the digital sound equalizer.
09. FAQ
1. No power
- the car’s engine is turned o ,
- if the power supply for accessories is installed in the car, you can turn the
car key to ACC to provide power to the accessories,
- if the power circuit is burnt, change it,
- if the temperature in the car is too high, lower it and try again.
2. No sound
- if the sound it set to minimum, set it to a proper value,
- improper wiring, improper file format or damaged files on the drive can cause
the lack of sound.
3. No radio reception
- if the antenna is not connected properly or the reception is weak, make sure that
the antenna is properly mounted in place,
- if you cannot find any radio stations during an automatic scan, the broadcasting
signal can be too weak for the device to pick it up. Try tuning it manually.
4. Wiring diagram
- make sure that the casing is properly grounded. Proper grounding eliminates
most issues with electronic noise. Good grounding of the casing require
connecting it to the car’s chassis. The area around the connection should be
thoroughly cleaned - with no rust, paint, plastic or dust - for best grounding
quality.