Xblitz Kinder, Руководство пользователя

Страница: 25 / 68

04. GETTING STARTED
A. CAMERA POWER SUPPLY
1. Connect the small plug of the power adapter to the camera's power connector
and the other end for 220V mains socket.
2. A steady blue LED diode indicates if the camera is working.
B. MONITOR POWER SUPPLY
1. It is recommended to fully charge the battery of the parent unit before
the first use. This will allow for uninterrupted operation even in the event
of a failure of a power supply.
Note: Use only the power adapter included with the device!
2. The LED charging LED will light up, which means that the battery charging
has started.
3. Set the power switch to the "ON" position to turn on the monitor.
05. USING THE DEVICE
A. PREPARATION OF THE DEVICE
Place the monitoring unit in a convenient place (e.g. on a table) and aim
the camera lens towards the area you want to monitor. Fit camera until
you are satisfied with the image displayed on the monitor.
CAUTION: Do not place the monitoring unit within the child’s
reach! If there is noise in the picture transfer units to other
places and ensure that they are not in the vicinity
of other electrical devices.
25