Xblitz GO, Руководство пользователя

Страница: 7 / 40

7
03. CHARGING THE DEVICE
To recharge the device, connect it to the charge using the USB cable. The time
required to fully charge the battery is approximately 2h. When the device’s battery
is about to deplet, the speaker will start beeping.
01. DESCRIPTION OF THE MODES
1. BT mode
When the device is switched on, BT mode, which is the default mode of ope-
ration, will automatically turn on. The speaker will confirm the activation of
BT mode with a sound notification and message on the display. Before first
use, pair the speaker with the selected device by activating BT connection on
the latter and select XBLITZ MASTER GO from the list. Successful connection
will be confirmed by a sound notification from the speaker.
To switch to the next ytrack, briefly press the + button. To switch to the
previous song, briefly press the - button. To increase or decrease the volume,
hold down the + button or the - button respectively. Briefly press the M
button to switch the unit to FM mode.
During a phone call, the speaker will read out the caller’s phone number,
then start beeping the incoming call. Briefly press the POWER button to
answer the call or hold the same button to reject the call.
Note: as the selected speaker model is not equipped with a microphone
when using hands-free mode, you must use the microphone on your phone.
2. FM mode
To enter FM mode, briefly press the M button. For automatic programming
of radio stations, press the POWER button. The unit will scan the frequen-
cies in the broadcast band 87.5 - 108 MHz and will store radio stations in
scanning order. These will be stored in the speaker’s memory. To switch
between the preset radio stations, briefly press the + or - button. Increasing
and decreasing the volume is analogous to BT mode - by holding down the
+ or - buttons.
Note: To improve the quality of radio signal, it is recommended to plug the
supplied USB cable into the micro-USB port on the device.
3. AUX mode
Connect the speaker to another device using the AUX line.The device will
automatically switch to AUX mode. To switch the speaker to another mode,
use the MODE button or remove the AUX cable (the speaker will then return
to the default BT mode).
4. Playback from external storage media