X8821e/X8821m / X8824e/X8824m User’s Guide
37
Global settings:
Specify the destination IP address and its subnet
Specify the gateway IP address or the interface (LAN or WAN port) where above
Dynamic Routing
Figure 36: Dynamic IP Routing Configuration
To enable the dynamic routing:
Select the Interface where to share and exchange the routing table. Click
Edit
.
Select the
RIP Version
as
1
,
2
or
both
.
Select the Operation Mode as Active, Passive, or Send Only.
Select
Enabled
.
Click
Apply
.
Figure 37: Dynamic IP Routing Configuration