waveshaper. For example, by processing just a
single waveform in one channel, it is compared
to 0V from the remaining channels, hence a
half-wave rectified version is available at the
max output and the negative halves are avail-
able at the min output. Also, by patching the
max or min output back to any of the inputs
allows one to independently scale the upper or
the lower half of the waveform by using the cor-
responding attenuators. A full-wave rectified
waveform can be produced by patching back
the min output to the inverting input of anoth-
er channel. Furthermore, by feeding a constant
CV to all remaining channels, the splicing point
of the waveform can be altered. Be aware that
channels without an input signal (or channels
attenuated to 0) will be treated as 0V, which af-
fects the operation of min and max. If you don’t
want that, simply feed unused channels with a
copy of signals from active channels. •
5
fig. 4
block
diagram
inputs
inputs
inputs
inputs
ind. output
ind. output
ind. output
ind. output
sub mix / all mix
sub mix
fiXed OffSet
AnAlYSiS
AttenuAtiOn
AttenuAtiOn
AttenuAtiOn
AttenuAtiOn
1
3
2
4
