Xantrex GRIB and Ethernet interface, Руководство по эксплуатации

Страница: 33 / 70

Basic Section
M370078-06 2-9
Software Installations
To set up the ENET option card, the Lantronix® DeviceInstaller program
needs to be installed on your PC. DeviceInstaller is an all-in-one utility
for setting up various Lantronix devices on a network. Device Installer
auto detects any devices on the network and allows for configuration of
network settings. As a management tool, the DeviceInstaller allows for
device monitoring and status verification of the ENET option card.
To install the DeviceInstaller:
1. Insert the DeviceInstaller CD into the CD ROM drive.
The CD should launch automatically.
If you need to manually launch the CD, click the Start button on the
Task Bar and select Run. Enter the CD drive letter, for example,
D:\Launch.exe. The DeviceInstaller Setup Wizard opens to guide the
installation process. See Figure 2-10.
2. Click Next to open the Select Installation Folder window.
The Select Installation Folder window prompts for a destination
folder for the installation.
Figure 2-10 DeviceInstaller Setup Wizard