Xantrex Freedom XC 2000, Руководство пользователя, Страница: 82 / 104

Operating During Transition Between Grid Mode and Battery Mode
68 Freedom XC 2000 (230VAC) Owner's Guide
Power Output
The Freedom XC can deliver up to 2000 W
1
of continuous utility
grade sine wave AC power. The wattage rating applies to resistive
loads such as incandescent lights.
1
As the temperature rises, it will gradually reduce its continuous power output from 2000 W at 40°C
ambient to 1500 W before the over-temperature shutdown occurs at 60°C ambient. See Specifications on
page 85 .
Input Voltage
The allowable Freedom XC input battery voltage ranges are
shown in the following table:
Operating
Condition
Battery
Voltage
Comment
Full
Operating
Range
LBCO –
17.0 V
Assuming the battery is full, the
inverter/charger will operate until
battery voltage goes past below
LBCO
b
and LBCO Shutdown
delay timer
c
.
Low
Voltage
Recovery
< LBCO+0.2 V
Inverter is able to recover and
continue to operate.
Table 13 Input battery voltage range
b
To set LBCO, see Adjusting Feature Settings in Configuration Mode on page 55 .
c
To set LBCO Shutdown Delay Timer, see Input Voltage on page 68 .