Xantrex Freedom X 1200, Руководство пользователя

Страница: 76 / 100

Operating in Battery Mode
74 Freedom X 1200 Owner's Guide
Operating Several Loads at Once
If you are going to operate several loads from the Freedom X
1200, turn them on one at a time after you have turned the inverter
on.
Turning loads on separately helps to ensure that the inverter does
not have to deliver the starting current for all the loads at once.
Turning the Audible Alarm ON or OFF
The Freedom X 1200’s audible alarm can be muted. See Adjusting
Feature Settings in Configuration Mode .
Any warnings such as error or fault conditions or imminent
shutdown are both displayed on the LCD screen and sounded on
the alarm speakers. See
To manually reset the alarm: on page 74 .
Audible alarm for warning: The unit beeps once when a warning
condition is detected.
Audible alarm for error: The unit beeps once every 5 s for 1 min.
To mute the alarm:
n
Press any one of the three function buttons.
The alarm is automatically muted after 1 min. But the error code
continues to be displayed until the error is cleared.
To manually reset the alarm:
1. Press the Power button to turn it Off (from a down position to
up) and press again to turn it On to reset an active alarm and
clear the error.
2. If the Inverter Ignition Control is set to auto-on, toggle the
ignition signal to clear the alarm and error.
3. Toggle the AC input power to force the transition between
grid mode and battery mode. This action clears the alarm
and error.