Xantrex Freedom SW 230V 815-3524-02, Руководство пользователя

Страница: 75 / 104

975-0696-01-01 61
Configuring the Freedom SW using the SCP
Cascading
The
Cascading
feature is found in the
System Settings
menu
only when two inverters are configured as a stacked pair (see
“Stacking Configuration Menu” on page 58). A stacked pair has one
Master unit and one Slave unit. The cascading feature allows
manually entered inverter/charger settings on the Master unit to be
automatically cascaded (or copied) to the Slave unit when the two
units are meant to have the same settings. Cascading helps simplify
the duplication of settings of one inverter into another. The feature
is
Enabled
by default but may be
Disabled
to accommodate
different settings for the Master and Slave units. Review with a
qualified system designer before adopting different settings for the
Master and Slave units.
To change Cascading settings:
1. From the System Status screen, press the Enter button.
The Select Device menu screen appears.
2. From the Select Device screen, press the Enter button.
The System Settings menu screen appears.
3. From the System Settings screen, press the down arrow button
to highlight Cascading.
4. Press Enter and use the Up and Down arrow buttons to change
selections.
5. Press Enter again to choose a selection.
6. Press Func (3x) to return to the System Settings menu.
Select Device
System Settings
FSW3524E 00
XAGS 00
XSCP
System Status
Battery
BatLev
Load
AC In 24.2V -64A 29
”
C
Invert
230V 6A
0V 0A
menu EnInv EnChg Shr
System Settings
Invert
AC Charge
System Mode
Cascading [Enabled]
1 2
3
Steps 4 to 6 are not shown.
FSW 230V Owners Guide.book Page 61 Tuesday, August 7, 2018 9:38 AM