Xantrex Freedom SW 230V 815-3524-02, Руководство пользователя

Страница: 36 / 104

22 Freedom SW 230V Owner’s Guide
Operating the Freedom SW with the SCP
SCP Navigation
Startup Screen
This screen is shown when the Xanbus SCP first receives power
from the Xanbus network.
Viewing the SCP Home Screens
The top level screens on the Xanbus SCP are the startup screen, the
System Status
screen (Figure 11) and the device
Home
screen.
After power is applied and the startup screen appears, the Xanbus
SCP displays the
System Status
screen. You can view the device
Home
screen for the Freedom SW 230V and other devices in the
system by pressing the up and down arrows.
System Status Screen The
System Status
screen appears after
the startup screen. It displays aggregated status information for the
entire power system. For example, a single system might have two
Xanbus network-connected Freedom SW 230Vs, one Xanbus AGS
module, and one Xanbus SCP all connected to a single battery bank.
The
System Status
screen always features a
menu
arrow pointing
to the Enter button. Pressing Enter takes you to the
Select
Device
menu screen. For more information, see “Reading the
System Status Screen” on page 28.
Figure 10 Startup Screen
Figure 11 System Status
IMPORTANT:
If you are uncertain which Xanbus SCP menu screen you
are viewing, you can return to the starting point—the
System Status
screen—by pressing the
Func
button repeatedly until the screen stops
changing.
menu
arrow that points to the Enter
button. The menu arrow is called a
soft key. See “Soft Key Navigation”
on page 24 for more information.
Menu screen title. Every screen
has one.
FSW 230V Owners Guide.book Page 22 Tuesday, August 7, 2018 9:38 AM