Xanter 806-1020, Руководство по установке

Страница: 26 / 54

12 Freedom HF Installation Guide
Basic Installation Procedures
Step 3: Mounting the Unit
To mount the Freedom HF:
1. Remove the Freedom HF from its shipping container, verify that all
components are present, and record relevant product information on
“Information About Your System” in the Owner’s Guide.
2. Select an appropriate mounting location and orientation. (See Figure 2
below.) To meet regulatory requirements, for use in on-land
applications, the Freedom HF must be mounted in one of the following
orientations:
• Under a horizontal surface ( see
1
)
• In a horizontal position on a vertical surface ( see
2
)
• On a horizontal surface ( see
3
)
3. Look for the mounting template and unfold. Tape it to the mounting
surface and pilot-drill the desired number of mounting holes. Remove
the template.
4. Fasten the Freedom HF to the mounting surface. If you are mounting
the unit on a wall or bulkhead, use #12 or #14 pan-head wood or sheet
metal screws to secure it to the framing behind the wall or bulkhead.
Alternatively, use nut inserts and 1/4-20 machine screws.
NOTE:
For marine installations, only this orientation is allowed, due to the
probability of moisture finding access into the enclosure.
Figure 2 Approved Mounting Orientations
1
See page 31 for drip
shield installation on
Marine applications.
2
3
Freedom HF Install Guide.book Page 12 Thursday, November 24, 2011 11:06 AM