XT-HDMI-MX44-4K18G
USER MANUAL
www.xantech.com
®
Panel Description
Front Panel
IR receiver window for matrix control
Power LED indicator
HDMI output selection buttons 1-4. Press to scroll through source inputs per HDMI output
1
2
3
1
2
Rear Panel
IR input - 3.5mm stereo jack provides zone specific routed IR
receiver input
IR output - 3.5mm mono jack provides routed IR emitter
output for discrete control of sources
Coaxial digital audio output - RCA (SPDIF)
Analog L/R audio output - 3.5mm stereo audio jack,
Supports 2 channel PCM only
Power on/off switch
EDID DIP switch - Used to manage the video and audio
resolution output by the connected source device.
HDMI inputs - connect to HDMI source devices
HDMI outputs - connect to HDMI display devices
IR input for matrix control
RS-232 Serial port - For control of switcher by third party control
devices
Power port - Use included 12V/2A DC power adaptor
4
7
9
14
13
9
5
10
10
12
8
11
3
5
Power
IR
Output 1
Output 2
Output 3
Output 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
XT-HDMI-MX44-4K18G
HDMI 4K 18Gbps 4x4 Matrix
Input
12V 2A
O
n/
O
ff
3 2 1
1
0
0
Coaxial
Coaxial
Coaxial
Coaxial
L/R
L/R
L/R
L/R
EDID
IR Ext.
RS-232
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Output
1
IR In
IR Out
Audio Out
2
3
4
1
2
3
4
1
2
3
4
4
11
6
7
6
8
12
13
14
Power
IR
Output 1
Output 2
Output 3
Output 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
XT-HDMI-MX44-4K18G
HDMI 4K 18Gbps 4x4 Matrix
Input
12V 2A
O
n/
O
ff
3 2 1
1
0
0
Coaxial
Coaxial
Coaxial
Coaxial
L/R
L/R
L/R
L/R
EDID
IR Ext.
RS-232
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Output
1
IR In
IR Out
Audio Out
2
3
4
1
2
3
4
1
2
3
4
Remote Control Description
OUTPUT AND INPUT SELECTION
A
Selects the zone OUTPUT (1 - 4) you wish to
change the source on
B
Selects the source INPUT (1 - 4) you wish to
change on the selected zone
EXAMPLE:
To switch source 2 to zone 4 you would
press Ouput 4 (A) followed by pressing Input 2 (B).
ALL button:
The all button selects all the inputs or
outputs in its corresponding box. Example: (The “All”
button in the Output box selects all the zones so all
zones will change to what source input is selected next)
PTP:
This button will align all zone outputs with the like
numbered source inputs. Example: Input 1 to output 1,
input 2 to output 2, etc
NOTE:
BUTTON PRESS SEQUENCE MUST BE
FINISHED IN 5 SECONDS, OTHERWISE THE
OPERATION IS DISCARDED
EDID SET UP
The matrix provides a comprehensive range of EDID
settings. Below are three examples of how to deploy the
desired EDID setting when using the supplied remote.
A.
Fix EDID to an Input or ALL inputs:
Press the
desired video resolution button (1080I / 1080P / 3D
/ 4K), then select the desired audio format (2.0CH
/ 5.1CH / 7.1CH), then select the source input you
want this EDID information allocated to by pressing
the INPUT 1 – 4 or the ALL button
B.
Copy EDID of Output-X to an Input or ALL:
Press
the COPY button then select the OUTPUT you wish
to copy the EDID information from, then select
the source input you want to copy this EDID to by
selecting the INPUT 1-4 or the ALL button.
C.
User defined EDID to an Input or ALL inputs:
Press USER1 / USER2 button then select the
source you wish to assign this EDID to by selecting
INPUT 1-4 or the ALL button
POWER
OUTPUT
INPUT
1
2
3
4
1
2
3
4
1080I
2.0CH
USER 1 USER 2
FN1
FN2
EDID
5.1CH 7.1CH
COPY
1080P
3D
4K
ALL
PTP
ALL
B
A
C