-
6
-
INSTALLATION – SMLIT01: LED and Light Sensor Module
The SMLIT01 sensor module provides status feedback by monitoring the light or LED indicators
found on a majority of electronic equipment. The sensor head is placed on top of the light or LED
indicator. For instance, the sensor head is placed on top of the power ‘pilot light’ LED of a DVD
player. Or, the sensor head can be placed on top of the “tuned” LED of a digital AM/FM tuner. The
SMLIT01 can also detect room light and daylight.
Colored filters are included for even more advance applications. A red colored filter can be used to
detect red LED lamps only. A green colored filter can be used to detect green LED lamps only.
(1) Plug the 1/8” (3.5mm) mini-plug into the sensing controller (CBCSM1 and MRC platform
provides power to the sensor module). Sensing controller power should be off.
(2) Connect the sensor head on the output of the video source.
(3) Connect the video cables as you would normally do.
(4) Turn on the video source output. (i.e. ‘power on’ button on a DVD player)
(5) Verify the SMVID01 LED indicator is ‘on’.
(6) Turn off the video source output. (i.e. ‘power off’ button on a DVD player)
(7) Verify the SMVID01 LED indicator is ‘off’.
(8) If the indicator is not ‘off’, then adjust the sensitivity until the LED just turns off.
(9) Repeat Steps 4 to 8 until both ‘on’ and ‘off’ conditions are satisfied.
