08905144A
-
3
-
APPLICATION
The figure above shows a common installation where the HDMIC5IR is used to deliver entertainment
content to another room. Using CAT5 cabling, the source component can be located in a remote
location. The source component can be controlled using an IR receiver.
The IR connection above uses an IRONEA Plasma and LCD proof IR receiver and an 283M emitter.
The IR receiver is mounted on the flat panel display. The 283M emitter is placed on the source
component.
IR RECEIVER CONNECTION
NOTE:
Typical IR receiver products require power, signal and ground connections. An IR receiver
can only be connected to a module where the power supply is connected. The “+12VDC” is only
active on the module that is attached to the power supply. For instance, if the IR receiver is to be
placed on the HDMIC5IR RECEIVER module, then the power supply must be connected to the
HDMIC5IR RECEIVER module.
