
08905155A
-
7
-
Connections
Connections for the D5IP consists of:
1. Audio Source Connections – Front
2. IR Control - Front
3. D5KP Amplified Keypad - Rear
4. D5XH DDS Expansion Hub – Rear
5. D5SH, D4SH4 DDS Wall-Mount Hub – Front
Source Connections
Sources are connected to the D5IP in one of three ways:
1. Analog
2. Digital Coaxial
3. Digital Optical
For best sound quality, use one of the Digital connection methods if the Source has this type of
output. For sources that do not have Digital outputs, use the Analog option.
Note 1: Make sure that the D5IP’s Source Input Switch is correctly set for the type of connection used.
Note 2: Multi-channel digital audio formats (5.1, 7.1, etc.) are not supported by the D5IP. Most audio/video sources allow you to change the digital output
to PCM Stereo. In most cases, this will allow multi-channel audio sources to output a “summed” stereo signal through the digital output. Consult the
audio/video source manual for details.
Note 3: Some audio sources which utilize a digital output require that you enable the digital output before it will function. If there is no audio present,
check the setup menu of the audio source to confirm that the digital output is enabled.
Analog (AUDIO IN L/R)
Use RCA audio patch cables to connect an audio source that does not have a Digital output.
NOTE: Be sure the RCA/OPT/COAX switch is ‘up’ and set to ‘RCA’.