background image

 

Freedom XF102- User Manual

 

 

WARNING: HAZARDOUS VAPORS. 

Spray materials, solvents, and other materials can be harmful

 

if inhaled or come in contact with the body. Vapors can cause severe nausea, fainting, or poisoning.

 

To avoid these risks, take the following preventions:

 

• Keep spray area well ventilated.

 

• Use a respirator or mask as vapors can be inhaled. Read all instructions supplied with the mask to ensure proper use.

 

• Wear protective eyewear.

 

• Wear protective clothing as required by disinfectant manufacturer.

 

 

WARNING: ELECTRIC SHOCK HAZARD

. May cause severe injury.

 

To avoid these risks, take the following preventions

 

• Keep charger electrical cord plug free from spray material and other liquids. Never hold cord at plug

 

connections to support cord or product. Failure to observe may result in an electrical shock and death.

 

• Never immerse electrical parts in water or any other liquid. 

 

• Do not expose atomizer, charger or battery pack to rain or wet conditions.

 

 

Unplug battery charger before cleaning.

 

• Do not abuse the cord. Never use the cord to carry the charger or pull the plug from an outlet. Keep cord away from heat, 

oil, sharp edges or moving parts. Replace charger if cord is damaged.

 

 

WARNING: SKIN INJECTION HAZARD

. May cause severe injury.

 

To avoid these risks, take the following preventions

 

• NEVER aim the atomizer at any part of the body.

 

• Do not aim the atomizer at or spray any person or animal.

 

• NEVER allow any part of the body to come in contact with the fluid stream.

 

• NEVER put your hand in front of the atomizer. 

 

- ALWAYS wear gloves while operating the unit; however, gloves will not provide protection against an injection injury.

 

• Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with any part of the    body.

 

• Always remove battery from the atomizer before servicing, cleaning tip guard or leaving unattended.

 

• Always use the nozzle tip guard. Do not operate atomizer without nozzle tip guard in place.

 

• Only use a nozzle tip specified by the manufacturer.

 

• Use caution when cleaning nozzle tips.

 

• High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that injection

 

occurs, seek medical attention immediately.

 

• Verify that all connections are secure before operating the unit.

 

 

 

Содержание XF102
















Отзывы: