Infrared Mode
Turn on the camera by pressing the 'Power button' for a second. The blue LED
will light. Long press the 'Mode' button' until the blue LED changes to solid
blue/red. You are now in 'Infrared Mode'. To start recording, briefly press the
'Power button'. The LED is blinking alternatively 2-3 times blue/red, than the
recording begins. Note: during recording, no LED is lit. Press again the
'Power button' to stop recording. The blue/red LED is lighting again. To exit the
'Infrared Mode', long press again the 'Mode' button'. The LED is changing to blue.
Finally, long press the 'Power button' to turn off the camera.
In 'Loop mode’, the oldest file will be overwritten when the micro-SD card is full.
The lenght of each recorded sequence in ‘Loop mode’ is 5 minutes. The video
files are saved in the 'Video folder'. Finally, long press the 'Power button' to turn
off the camera.
Motion detection
Edit and activate the ‘Motion detection’ in the ‘settings.txt’ file. Turn on the
camera by pressing the 'Power button' for a second. The blue LED will shortly
light up and than the blue LED will blink 2-3 times. The ‘Motion detection’
becomes directly active. Note: during the ‘Motion detection’ operation, no LED
is lit. The camera will record sequences of 1 minute each. After that, the camera
is going in sleep mode, but the ‘Motion detection’ is still active. If the camera
permanently detects movements, it will only stops recording when no more
movement is detected. In this case the recording is stopping after a defined time.
To stop the ‘Motion detection’, press the ‘Power button’ again. Finally, long press
the 'Power button' to turn off the camera. Note : to return back to normal camera
operation, you need to edit again the ‘settings.txt’ file.
Voice recorder only
Turn on the camera by pressing the 'Power button' for a second. The blue LED
will light. Short press the ‘Mode button’. The voice recording begins.
A red LED will blink 3 times. Note: during the ‘Voice recording’ operation, no LED
is lit. To stop the ‘Voice recording’ press the ‘Mode button’ again. The LED is
returning to solid blue. Press the ‘Mode button’ again to record a new sequence.
To stop the ‘Voice recording’ press the ‘Mode button’ again. The voice files are
saved in the 'Record folder'. long press the 'Power button' to turn off the camera.
