kubi
Enhanced Audio Kit
KUBI CLASSIC AND PLUS
KUBI CLASSIC AND PLUS
INSTALLATION INSTRUCTONS
INSTALLATION INSTRUCTONS
IMPORTANT! The goal of this
procedure is to install the
speaker bracket WITHOUT
LIFTING, MOVING OR REMOV-
ING THE ARMS. IF THE ARM
SPRINGS BECOME DISEN-
GAGED, A SEPARATE OPERA-
TION MUST BE PERFORMED!
IDENTIFY WASHER TYPE:
White Plastic or Stainless Steel
White Plastic Procedure:
Use the supplied Allen wrench
and remove the screw from the
right washer.
Keep downward pressure on
the arm and carefully remove
the washer.
Replace the washer with one of
the supplied white nylon bush-
ings.
Place the audio speaker brack-
et over the right arm bushing
and install the retaining screw.
Tighten so the bracket can still
be rotated.
Remove the left arm screw and
washer and install a white nylon
bushing.
Rotate the bracket down and
install the left screw. Tighten
both screws. If arms do not
move freely, loosen arm screws
slightly until arms open and
close freely.
WHITE
STAINLESS
Copyright © 2017 Xandex Inc. 1360 Redwood Way, Suite A, Petaluma CA 94954
TEL: (707) 763-7799 EMAIL: [email protected] For more infomation visit www.revolverobotics.com P/N 180-0135r1
