XAG XP 2020, Руководство пользователя

Страница: 21 / 28

www.xa.com/en
18
THREE LIGHT FLASHING (Green)
TWO LIGHT SLOW FLASH (RED)
GPS MODE
SAFE MODE
Auto
Flight Status Indicator
ONE RED + ONE GREEN LIGHT FLASH
TWO LIGHT FLASHING (Green)
SOLID RED
QUICK FLASH PURPLE
QUICK FLASH BLUE
QUICK FLASH RED
THREE LIGHT FLASHING (RED)
Description
WEAK GPS SIGNAL
GOOD GPS SIGNAL
Flight controller is not initiated yet
or is being preheated after being
powered on
FC Formatted / Abnormal Parameter
Abnormal power system
GPS Error
Low Precision
Abnormal sensor (Exclude IMU)
IMU Error
Low voltage Warning
Status
Manual
Abnormal
Low Voltage
QUICK FLASH WHITE
The Flight Status Indicator Lights (Tail lights) indicate the status of the UAV. See the table below
for details:
Spraying Status Indicator Description
SOLID
QUICK FLASH
SLOW FLASH
Spray system is Normal
UAV is Taking off / Landing
Spray system is Abnormal
observe interface of plant protection operation APP
Check the UAV Status
Check Spray Status
Two Spray Status Indicator Lights (Arm Lights) are located on the side of each motor base, represent-
ing the status of corresponding nozzles under each motor. The color of the indicators can be adjusted
in the "Plant Protection Operation" APP. Status indicator light definitions are as follows: (using the red
light as an example)