XAG P100 Pro 2023, Руководство пользователя

Страница: 31 / 49

www.xa.com 27
3. operation information will be displayed in the menu bar. You can complete spraying settings and
route settings as needed.
3. Tap on "Start Operation", make sure there is no one within 10 meters around the aircraft, and slide
right to confirm takeoff. After the self-testing is completed, the aircraft will automatically take off and
start spraying.
Spraying Settings
• Tap on Spraying Settings in the menu bar on operation page, drag the adjusting button to set spray
volume and atomized droplet size.
• Start "Prescription Map Operation" and the system will automatically generate prescription map for
more precise operations.
• Tap on "Change segment for operation" to select whether to start spraying when the segment is
changed.
Route Settings
• Tap on Route Settings in the menu bar on operation page and select "Entry/Exit Routes" to set flight
height and speed. Turn on/off "use safe spot planning" and "set return auxiliary route".
• Tap on the route name to select to change routes.
• Select "Operation Route" to set flight height, flight speed, route direction, route spacing, boundary
safety distance and obstacle safety distance.
• Select "Advanced Settings" to turn on/off radar terrain following, radar obstacle avoiding, auto route
optimization of breakpoint continuous flight and 3D route operation.
• Tap on "Operation Area" to drag adjusting button to adjust shuttle operation route and turn on/off
boundary mode.
More
• During flight, tap on "Hover" and the aircraft will hover at current position. Tap on "More" to perform
landing, return, tap & go operations, adjust operating height and speed, and turn on/off radar terrain
following or radar obstacle avoiding.
• After entering tap & go, the aircraft will hover at current position. Drag the white cross cursor to
move it to the target position and tap on "Go", the aircraft will fly to the target position following
the planned route. When it is completed, tap on "Exit" to go back to flight page and then tap on
"Continue", the aircraft will continue to start operation.
Before starting flight operation, please make sure RevoSpray/RealTerra system is installed.
Before using 3D route for operation, please use "Mountain Mode" of RealTerra to generate 3D HD
maps.
During flight operation, the operator should closely observe the flight environment for unsafe factors
and ensure the aircraft is away from obstacles and crowds.
The effective range of target position for "Tap & Go" is within a radius of 50 meters (i.e. the green
circle) and with the current aircraft's position centered.
Note