GETTING STARTED
Battery Installation:
Your X33X COMMUNICATOR is powered by a Lithium-Ion BATTERY (included).
To install and replace the BATTERY
:
1. Release the BATTERY COMPARTMENT COVER LATCH located on the rear side of the
unit, and remove the COVER from the BATTERY COMPARTMENT.
2. Install the Lithium-Ion BATTERY into the BATTERY COMPARTMENT. Be certain to
follow the correct orientation in the compartment. A battery installed incorrectly can
prevent the unit from operating.
3. Replace the COVER and lock the BATTERY COMPARTMENT COVER LATCH into
position.
NOTE: If you install/replace the battery and the LCD Screen remains blank, press and
hold the Power button for 1 second to start Watch Mode.
5
CAUTION:
To reduce the risk of personal injury, use only the battery listed in the
Owner’s Manual. The X33X COMMUNICATOR has a built in POWER SAVER
feature for maximum battery life. But when the X33X COMMUNICATOR is
not being used, conserve battery power by pressing the POWER/MENU but-
ton to turn OFF the unit. Remove the BATTERY if the unit will not
be used for a long period of time.
Battery
Compartment
Cover
Battery
Compartment
Cover Latch
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM Page 6
