Your KP5X COMMUNICATOR comes with a Belt Clip to allow you to wear your COMMUNICATOR in your belt.
To install the Belt Clip, simply push the Belt Clip into
the Belt Clip latch until it locks into place.
To remove Belt Clip, press the Belt Clip lock and
pull the Belt Clip away from the latch.
1. Installing the battery will automatically turn-on the unit and proceeds to Watch Mode.
2. Enter to COMMUNICATOR Mode by pressing and holding the
Power
key for around 3 seconds. To exit
COMMUNICATOR Mode, press the
Power
key for around 3 seconds while on COMMUNICATOR mode.
2. Check the battery condition on the display.
3. Adjust the volume to a comfortable level by pressing the
UP
or
DOWN
key (default).
Navigating through the Menu
To access the advance feature of the KP5X, your COMMUNICATOR has a Menu two (2) function:
Watch Mode (Default)
COMMUNICATOR Mode
WATCH Mode
1. Your COMMUNICATOR will automatically go to Watch Mode once the battery is installed, only the watch segments and
icons will be displayed on the LCD during this mode. Press the
Menu
key briefly to enter the Time Setting Mode; a
short keybeep tone will be locally generated when the Time Setting mode is engaged.
2. Additional presses of the
Menu
key for no longer than 1 second will advance you through the menu until exiting to
Watch mode. A short keybeep tone is generated at each key press
3. Menu mode exits to standby mode when the
Menu
key is pressed while the final menu selection is active.
4. The unit automatically times out of Menu mode and enters Watch mode in 10 seconds.
USING THE COMMUNICATOR
Channel
Hours (Watch)
Minutes (Watch)
Menu
1~14
12hr am/ 12hr pm
0~59
VOX
Menu
On/Off
INSTALLING THE NECKBAND and BELT CLIP