1. POWER ON THE 8006 PIN PAD
There are three model of communication interface for xPED-‐8006L2-‐3CR: USB interface cable,
RS232 interface cable, POE interface cable.
§
POE interface cable: There is a fixed POE interface cable at the top end of 8006 device as
Figure 1 for power and communication connection to the terminal or PC. POE interface
cable can supply the power by two options below
Figure 1
a.
From RJ45 port
If Ethernet cable is able to supply the power, plug on the RJ45 cable into RJ45 port (Figure 2) can
power on the device.
b.
From Micro USB port
Micro USB cable can also supply power to the device by plugging on the micro USB cable into micro
USB port (Figure 3).
Figure 2 Figure 3
Note:
Turn off or unplug the terminal/PC whenever you connect or disconnect the PIN Pad. Be sure the
terminal/PC is not processing data when powering down.
§
2 in 1 USB 2.0 plug with Micro USB jack
USB 2.0 plug is mainly used to connect the device to PC for ActiveSync (Figure 4) while micro USB jack is
for power supply (Figure 6).
§
2 in 1 RS232 (DB-‐9) plug with Micro USB jack
It is mainly used to connect the device to PC for serial port communication (Figure 5) while micro USB jack
is for power supply (Figure 6).
Figure 4 Figure 5 Figure 6
§
Input rating: DC 5V, 1.0A and/or DC 48V, 270mA (supplied by Ethernet Interface Adapter)
§
AC adapter:Hon-‐Kwang,type:HK-‐UA-‐050A100-‐XX (XX = AU,EU,GB,US)
§
Operating Temperature: 0ºC ~ 40 ºC
