X4 TOOLS HDR-G1, Руководство пользователя

Страница: 12 / 16

12
Mobile 12 V High-Pressure Cleaner HDR-G1
Using the device
13. Depending on the use, the lever up the
spray gun has several options and can be
positioned accordingly. The basic option is
to pull the lever for use. For a continuous flow
the lever can be flipped over to the front.
ATTENTION!
The pump is controlled by an
integrated pressure switch. Please allow
5 to 10 seconds to pass between water
OFF and ON.
WARNING!
If the unit is not used for more than 10
minutes it is recommended to use the
manual on off switch and let the pressure
out of the system.
fig. 4
14. The dosage of the detergent can be control-
led with the rotary knob at the bottom of the
bottle/top of the spray gun. When the nipple
shows towards the pressure hose, the flow
of detergent is stopped. To activate the flow
turn the nipple sideways to the left.
15. Turn off the system if the bucket needs to be
refilled. Refill the bucket and replace it onto
the pump unit.
WARNING!!
Do not fill the bucket with water while
it is standing on the pump. There is a
danger that the bucket may tip and water
enters the electrical connections.
After use
16. To dismantle the unit, first take the bucket
off the pump. Then activated spray gun until
the majority of water is squeezed out of the
system.
17. Switch the pump off by using the main switch
and activate the spray gun once more to
release the pressure.
18. Disconnect the hose from the gun and the
pump unit
19. Switch the pump on again briefly to remove
remaining water. It is advisable to lift the
pump up and change its position during
the process to get rid of water remains in the
pump.
20. Fold the bucket with a twisting motion.
(Twist and compress)
fig. 5
Maintenance
• Never store the pump in the vicinity where
there might be frost. Remaining water in the
pump might freeze and can damage the pump.
The plastic material becomes brittle in cold
weather.
• To clean the plastic parts do not use strong
solvents such as alcohol, petrol or thinner,
as these can damage the housing and the
accessories.