Information on this user manual
This user manual contains important information
for the safe use of the product. Therefore, for your
own safety and for a successful use, please read
this user manual completely before assembling and
using the product.
Liability
We do not accept liability for any damage to proper-
ty or for personal injury that is due to improper use
or failure to follow the instructions in this operating
manual and the safety advice. In such cases any
claim under the guarantee is null and void!
Before use
Please read the instruction manual carefully before
using this product and keep if for future questions.
Unpacking and prove
Unpack the content and check it for completeness
and integrity. If you find a defect, contact your de-
aler immediately. Please keep the packaging, this
operating manual and possible supplements for re-
ference. If you pass on the product to anyone else,
please hand over the operating manual as well.
Dispose of no longer required packaging material in
an environmentally friendly manner.
Designated use
This product and delivery content serve as applica-
tor to decorate textiles, wood, leather and cork with
designated hot fix rhinestones. This product must
only be operated with 230 V ~ 50 Hz alternating
voltage. The designated use is defined by the inst-
ruction manual and in following the appliance and
the warnings mentioned in this user manual. This
product is not suitable for commercial usage.
General notes
All mentioned company and product names are
registered trademarks under the rights of their
owners. © All rights reserved.
No liabilities will be taken for damages or claims
resulting out of not reading and/or not following the
user guide and/or any form of modification on or in
the product. Under these circumstances, no
warranty services will be given. Liability cannot be
taken for consequential damages.
Declaration of Conformity
This product meets the requirements of
both current national and European
guidelines (directive 1999/5/EG R&TTE)
The declaration of conformity can be found at:
http://productip.com/?f=6e30d
Safety guide
Please read the safety guide before using the
product. This information is for your safety and the
protection of the device and devices connected.
You will also find pecific safety instructions in the
following chapters of this user manual.
DANGER!
High risk for children and other groups of
people! Inappropriate handling may lead
to injuries or material damage. This product is not a
toy and should not be handled by infants, small
children. Children cannot assess the dangers
connected with electrical devices. The device
contains small parts that can be swallowed (risk of
suffocation)! Do not leave the packaging material
lying around. Children might play with the plastic
bags and risk suffocation.
»
This product is designed with protection class II.
Only an appropriate mains socket (230 V ~ 50 Hz)
must be used.
DANGER!
Misuse may cause risk of damage.
Incorrect use of the device may lead to
damages.
»
Cables must never be crushed, folded over, dama-
ged by sharp edges or subjected to any other kind of
mechanical stress.
»
The product may not be subjected to extreme
heat or cold. Do not expose the product to intense
sunlight, open fire or other heat sources.
»
If the mains cable or another cable connected to
the product is damaged, it must be replaced by the
manufacturer or a similarly qualified person (e.g. a
qualified electrician).
DANGER!
If the device or its connecting cable
is damaged, do not touch it.
Switch the mains currentless and take the plug out
of the socket. Do not operate the product after-
wards, but take it to a specialist.
»
To guarantee a currentless state, always pull out
the plug from the socket. Therefore always keep
the socket freely available.
»
If you want to take the plug out of the socket,
always pull it directly at the plug. Never pull it out
by the cable, as this could break.
»
Take the plug out of the socket when the product
is not in use for a prolonged period.
DANGER!
Never touch the housing or cables
or the device with wet or damp hands. This may
lead to an electrical shock!
»
Take care of good ventilation during usage of this
product.
»
All persons who operate the device have to follow
the instruction manual.
HINT:
If you have any doubts on the
function or further questions, please
contact your local dealer or our service center.
Set up
»
When selecting the set up location for the product
please note the room conditions, like a close mains
socket. Also avoid vibrations, dust, heat, cold and
dampness.
»
Inappropriate placement can damage the product
and its components. Considering the large number
of different types of varnishes and polishes used
for furniture, it is possible that the devices‘ feet will
leave visible residue on the furniture as a result of
a chemical reaction. The product should therefore
not be placed on the surfaces of furniture without
suitable protection.
»
Pay attention to a stable installation place, as
falling equipment can cause a not insignificant
accident risk.
Using
During the usage of this applicator the glue un-
derneath the rhinestones gets heated up. The glue
becomes liquid and attaches the rhinestone onto
the desired object.
This product must not be used to apply
rhinestones onto not heat-resistant material
as smartphones or plastics. The material or
device may get damaged!
Let the device completely cool down before
storing it. Never leave the hot device
unattended.
Never touch the hot metal.
Always work on a heat-resistant underground.
The product must only be used with rhinestones,
that already have glue attached for this purpose.
»
Before using this product on the intended object,
try out the function.
»
Before using this product on the intended spot,
check the result on a place that is not visible.
»
Screw the desired tip onto the applicator. Make
sure that the tip sits tightly.
»
Now plug the product into an appropriate mains
socket (230 V ~ 50 Hz). The applicator starts heating
up the tip and reaches the right temperature after
approx. 3 minutes.
»
Put the applicator into the safety stand during this
process.
»
Take the applicator from the safety stand and hold
it like a pen. Never touch the hot metal.
»
Press down the rhinestone with the applicator
for about 8 to 15 seconds. The rhinestone gets
heated up and the glue begins to melt. The duration
of the melting process differs from material and
thickness of the rhinestone. At first, press down
the rhinestone for a short time only and check the
connection point. If it’s not strong enough, continue
pressing down the rhinestone a bit longer.
After usage, place the applicator into the safety
stand and disconnect the plug from the mains
socket.
Changing the tips
»
Unplug the product from the mains socket.
»
Let the product cool down completely.
»
Unscrew the old tip and put in a new tip.
Trouble shooting
Problem
Solution
The product
does not heat
up.
Try another mains socket.
Check the fuse of the mains
socket.
The tip won’t
come off.
Grab the tip with pliers and turn
the tip. Try again to unscrew
the tip afterwards.
Cleaning and Maintenance
Always check the technical safety of the product
before use, for example check the cable or housing
for any damages.
If a secure usage is not longer guaranteed, do not
use the product any more and make sure others
don’t use it as well. Do not forget to unplug the
product from the mains socket, may even switch
the mains currentless.
A safe usage is not guaranteed under the following
circumstances:
- The product or cable have some visible damages
- The product does not work anymore
- The product was stored under unfavourable con-
ditions for a long time
- The product was exposed to high stress during
transport
For maintenance, detach the product from the
mains plug and let it be repaired by a qualified
person only.
DANGER!
Danger of electrical shock!
This device should only be opened and/or repaired
by an expert or a person who is qualified to do so.
If you pass on this product, always use the original
packing to secure the product from any damage.
Also pass on the instruction manual. It includes
important information for safety and usage of this
product.
Keeping the surface clean
Do not use any volatile liquids, such as insect
sprays, close to the product. Do not let plastic or
rubber devices touch the product for a longer peri-
od of time. This could leave marks on the devices.
Always use a soft, dry and lint-free cloth to clean
the unit’s exterior. If the device is extremely dirty
you can use a soft cloth, dampened with water or a
mild cleaning solution to clean. Never use any ab-
rasive or harsh cleaning agents (e.g. alcohol, petrol
or thinners) as these could damage the controls,
casing or any markings and labels found on the
device.
Disposal
Consumers are legally obligated and
responsible for the proper disposal of
electronic and electrical devices by
returning them to collecting sites designa-
ted for the recycling of electrical and electronic
equipment waste. For more information concerning
disposal sites, please contact your local authority
or waste management company.
Technical data
»
Operating voltage: 230 V~/50 Hz
»
Power: 6 W
»
Weight (including cable): 98 g
Manual Hot fix rhinestone applicator set, 10 pieces
Content
Rhinestone applicator
7 tips
Safety stand
Tube with rhinestones (approx. 120 pieces)
Instruction manual
tip
grip
cable
safety stand
rhinestone applicator
tips
tube with
rhinestones
Service-Adresse/ Service adress
Lived non food GmbH | Friedrich-Seele-Straße 20
38122 Braunschweig, Germany
+49 (0) 531 224356-82 |
www.x4-tools.de
Hersteller
Lived non food GmbH | Friedrich-Seele-Straße 20
38122 Braunschweig, Germany
www.lived-non-food.de
A
rt
.-
N
r. 7
00
28
7, 5
/2
01
9
