X4-TECH SOL T700, Инструкция по эксплуатации

Страница: 21 / 30

40 41
› Use the „  “ and „  “ buttons to make a selection.
› Press „ENTER” after selecting an option.
› Select „YES” within the dialogue window to confirm deletion.
Installation
› This menu option allows you to search for stations in several ways.
Area Search
› Select the option „Area Search“ to begin an automatic channel search. Existing
channels will be deleted. This scanning process will search through the whole
frequency range. Channels will be stored in the order that they are found. A dia-
logue window will appear on display requiring you to confirm a channel search.
Select „YES” to delete existing channels and to begin an automatic search.
Manual Search
Select „Manual Search“ to search through a certain channel for stations. Stations
of a channel already existing within a channel list will be searched through and
deleted. Following this, the channel will be search through completely once
again. Stations found will be added to the end of the channel list.
› Use the „  “ and „  “ button to select a channel that you’d like to search through
for stations.
› Press „ENTER” to begin searching.
› Press „EXIT” to cancel a search process and to exit this menu option.
Auto Search
› Select „Auto Search” to search through a certain frequency range for stations.
Stations within this frequency range, which already exist in the channel list, will
be searched through and deleted. Following this, the frequency range will be
search through completely once again. Stations found will be added to the bot-
tom of the channel list.
Start Freq (KHz) determine where a search is to begin
› Use the numerical buttons to enter the desired start frequency.
› Use the „

“ and „

“ buttons to move through positions.
End Freq (KHz) determine where a search is to end
› Use the numerical buttons to enter the desired end frequency.
› Use the „

“ and „

“ buttons to move through positions
Bandwidth choose the bandwidth for the selected channel
› Use the „

“ and „

“ buttons to select a bandwidth
› Use the „

“ and „

“ button to change through options.
› Press „ENTER“ to begin searching.
› Press „EXIT” to cancel a search process and to exit this menu option.
Configuration
OSD
› Select this option for access to various display and language setting options.
Chapter 8 Main menu Chapter 8 Main menu