X4-TECH SlimStyler, Инструкция по эксплуатации

Страница: 12 / 25

Chapter 6 Connecting to a computer
General information
The player’s memory is empty when delivered. This means
there are no existing music files found on the player that
can be played back.
In case you do not have any MP3 files, you can use any
available audio CD with one of the various programs
available on the market to create your on MP3 files. It’s also
possible to record radio or television programs with the ap-
propriate programs; there are even special internet radio
stations that play in MP3 format.
Each directory created on your MP3 player (or also
in the main directory) can hold only up to a maxi-
mum of 99 MP3/WMA files. The player will not play
any files exceeding this amount.
A MP3 player version with a memory capacity of for exam-
ple 1024 MB, will allow you to create even more directories,
thus expanding for example the number of MP3 files that
you can have on your player (e.g. for each artist or for your
favorite songs and so on).
This limitation naturally does not apply to normal data
transmission (e.g. when pictures are to be transmitted bet-
ween two computers)!
Before connecting your MP3 player to a computer,
please make sure that the USB cable is connected
to your player first, before connecting it to your
computer. Never disconnect an MP3 player from
a computer during data transmission! Improper
disconnection or operation can result in damaged
or lost files. We assume no liability for any damage
resulting from the failure to comply with the in-
structions (as described above).
After data transmission has taken place, wait for a few se-
conds before disconnecting the device. Disconnect your
player by clicking (for Windows) on the symbol „ ” in the
taskbar of your operating system. After clicking on „Safely
Remove Hardware” („Close” or similar), now you can detach
the USB cable from the computer port first, before detach-
ing it from your MP3 player.
Chapter 6 Connecting to a computer
Connecting to a computer