24
25
Push the switch to „ON” to turn the device on. Push the switch to „OFF” to turn the de-
vice off. The device will automatically switch over to a battery operational mode if it is
not connected to an external power supply.
Once switched to „ON” you can use the remote control to turn the device on or to
switch over to a standby mode.
After turning your device on for the first time you will be asked to select a preferred
OSD language and area. After this you will be asked to confirm these settings. If you
confirm with „YES”, an automatic channel scan will begin. After the scan has been com-
pleted, the device will switch over to the first channel in a television mode.
Chapter 6
Turning on/off
Chapter 7
Menu
In general, you will be able to navigate within a menu by using the arrow buttons on
the remote control. Confirm selections with the „ENTER” button. You can press the
„MENU” button to either open the main menu or exit it again. If „INFO” is displayed
towards the bottom of the menu screen in a main menu mode, then you can press the
„INFO” button on the remote control to display controls available within the following
menu items:
Main menu
Digital TV
Channel
Manager
Channel Orga-
nizer
Organizes channels
Channel grou-
ping
Adds channels to favourite channel
groups
Delete all
Delete all television and radio
stations
Installation
Auto Search
Starts an automatic channel scan
Manual Search
Enter a certain frequency
Area Search
Search within a certain frequency
range
Configura-
tion
OSD
Settings for OSD and audio langu-
ages
TV
TV settings
System Setup
Settings for equalizer and area
Time
For setting the time
Wakeup Timer
For settings various timer modes
Software
Upgrade
For installing new software from a
storage medium
7
Menu
6
Turning on/off
