X4-TECH BoomStar BT, Руководство пользователя

Страница: 11 / 15

22
Connecting external devices via cable
The BoomStar BT can also be used as a wired active speaker system.
➝
Connect the headphone output of your music source (mobile
device) with the BoomStar BT by using the supplied connection
cable.
➝
Press and hold the blue Bluetooth symbol (7) for 2 seconds to
change to AUX mode.
➝
Start playing the music.
➝
The volume can be controlled through the BoomStar BT.
Other controls are not possible.
➝
To change back to Bluetooth mode, press and hold the Bluetooth
symbol (7) for two seconds.
Interference from other devices
Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the
same frequency, microwave interference may occur and resulting
in communication speed deterioration, noise, or invalid connection
if the system is used near a wireless LAN device. In such a case,
perform the following. Use the system at least 10 m away from the
wireless LAN device. If the system is used within 10 m of a wireless
LAN device, turn off the wireless LAN device.
Cleaning and maintenance
Always use a soft, dry and lint-free cloth to clean the unit’s exterior.
If the device is extremely dirty you can use a soft cloth, dampened
with water or a mild cleaning solution to clean. Never use any
abrasive or harsh cleaning agents (e.g. alcohol, petrol or thinners) as
these could damage the controls, casing or any markings and labels
found on the device.