Installation
1. Remove the LED-Strip from the packaging. The LED-Strip may only
be used outside of the package.
2. Clean the area to which the LED-Strip is to be attached. These areas
must be sufficiently even, clean and free from grease to ensure
optimum adhesion of the LED-Strip.
NOTICE!
Follow the safety instructions found in chapter “Cleaning”.
3. Plug the USB Connector of the LED-Strip into a free USB slot of your
TV or personal computer to check its function.
4. Now check the LED-Strip for proper functioning. Already processed
or cut strips are excluded from reclamation, conversion or
redemption! LED strips are – like all illuminants – consumable
articles. In case of correct operation you can proceed with point 5.
5. Pull off the adhesive foil from the backside of the LED-Strip.
6. The LED-Strip may only be shortened and not extended.
7. The LED-Strip may be shortened at the marked spots. Therefore you
have to cut the Strip with scissors at the broken lines as seen in Fig. 1.
Fig. 1
NOTICE!
Please note that when shortening the LED-Strip, it is no longer protected
from dust or water at this point. Close it again, e.g. with neutral silicone, to
restore the original protection.
Application
As soon as you have the LED-Strip connected to the USB Slot (5 V output)
of your TV or personal computer, it will automatically switch on and off
with the device it is connected to.
With the small button “MODE” you have the option of using 7 different
colors (white, red, green, light blue, dark blue, light green and purple),
each with 2 different intensities and 8 different color-changing
programs. With its memory function the LED-Strip keeps the last used
color.
Troubleshooting guide
Fault description
Cause
Remedy
LED-Strip does not
light up
LED-Strip is not
connected to
the USB Slot.
Check the connection
of the plug.
USB Slot does
not have 5 V
output.
Use a USB Slot that has
5 V output.
The LED-Strip is
illuminated even
though the TV
is switched into
standby via remote
control
Manufacturer-
specific older
TV’s may deliver
electricity to
the USB slot in
standby mode
Disconnect the
LED-Strip after use or
switch off the current
supply of your TV
Cleaning
WARNING!
Electric current presents a danger of death! Dangerous
situations can arise if the LED-Strip and its components are
cleaned while the power is on. Always disconnect the USB plug from the
USB socket before you clean the product.
NOTICE!
There is a risk of damage if cleaning is not carried out properly!
Corrosive or abrasive cleaning agents can damage the LED-Strip and
its components. Use only a damp cloth to clean the LED-Strip and its
components.
Disposal
Electrical and electronic devices must never be disposed of in the
regular household waste!
Consumers are legally obligated and responsible for the proper
disposal of electronic and electrical devices by returning them
to collecting sites designated for the recycling of electrical
and electronic equipment waste. For more information concerning
disposal sites, please contact your local authority or waste management
company.
lived non food GmbH, all rights reserved
No liability will be taken for modifications or mistakes regarding the
technical data or product features described in this user manual.
All rights reserved. Any reproduction, transfer, duplication or filing of
this user manual or parts of it, as well as the translation into a foreign
language or computer language is prohibited without the explicit
approval of the manufacturer. Due to the fast advancement of these
products, no guarantee of completeness can be given. Modifications in
technique and configuration are subject to change at any time.
To receive a digital copy of this user manual, please contact our service
department.
Guarantee and service conditions
You receive a voluntary 2-year manufacturer guarantee, starting at
purchase date, for material and production defects of the product.
This guarantee is applicable in Germany, Austria and Switzerland. The
receipt counts as a proof of guarantee. Within the guarantee period we
will repair all material and manufacturer defects free of charge. Your
statutory warranties remains unaffected by this guarantee.
The guarantee does not count:
• in case of damages which have arisen after improper use
• for wear parts / accessories that are subject to natural wear and tear
• for defects that are known to the customer at purchase
• in case of damages that occurred due to repair or intervention of the
buyer or an unauthorized third party
• in case the device was connected to a higher voltage as stated on the
device
• when dropping the device or single elements of it
• for improper transportation or packaging
• damages that occurred due to force majeure
• for non-observance of valid safety precautions
• for non-observance of the manual
In case of a guarantee claim, the date of sale has to be proven by receipt
or invoice. Replacements for reasons covered by the guarantee do not
lead to an extension of the original guarantee period, neither for the
device itself nor for any replaced components. If you are claiming a valid
guarantee, we are entitled to choose whether we will repair the device
free of charge or exchange it for a new device. Any further claims are
excluded. Parts replaced will pass into our property. We reserve the
right to change defective parts or products against follow-up models.
Please always contact us before you return your product.
Provided that a return shipment has been agreed upon, send the
defective product securely packaged at your own cost to our service
department.
It is absolutely necessary that you add a copy of your receipt to your
return shipment. Repairs carried out after the guarantee period are
subject to a charge. We will not accept freight collect shipments and will
return them to the sender.