X4-Life Diamond, Инструкция по эксплуатации

Страница: 15 / 18

28 29
Activating the doorbell
Insert battery (transmitter)
The transmitter requires a 3 volt battery CR2032.
• Push a flat object into the retainer aperture.
• Insert the battery into the battery compartment with the positive pole (+).
pointing upwards. Push the battery down gently until you can hear it latch into
the retainer.
• Hook the retainer of the covering into the notch and click the covering onto the
supporting plate until you can hear it latch.
Press slightly to the side
Insert batteries (receiver)
The receiver requires 3x 1.5 V batteries (AAA, LR03).
Push down the retainer using your fingernail and remove the covering.
Insert batteries. Remember the polarity! The negative pole points to the spring.
Insert the batteries and close the cover
1.5
AAA
1.5
AAA
1.5
AAA
Checking the functions
After inserting batteries for the first time or after changing the batteries, the
function has to be tested.
• Press the bell push on the transmitter.
• The selected melody plays if everthing is in good order and a red LED located at
the push button of the transmitter will light up.