X4-Life 701753, Инструкция по эксплуатации, Страница: 20 / 60

20
caused if moisture enters the product.
»
Never immerse the product into water.
» Take care that no liquids enter the casing of the product
Installation
DANGER! Disregarding can cause material damage.
Inappropriate placement can damage the product and its
components. Considering the large number of different types
of varnishes and polishes used for furniture, it is possible that
the device will leave visible residue on the furniture as a result
of a chemical reaction.
»
Open up the battery compartment at the rear of each lamp by
turning it slightly to the left.
»
Put in 3x AA batteries. Please take care of the correct
polarity.
»
Put on the cover of the battery compartment again and turn it
slightly to the right until all three hooks are fastened.
»
Pick an appropriate place to put on the lamps. This place
must not be over a sink, the stove or other fire places.
»
Clean the chosen place thoroughly. It must be free from
grease, clean, dry and even.
»
Remove the protection from the adhesive point at the rear of
each lamp.
»
Press each lamp against the mounting surface for about 10
seconds.