15
» If you have any doubt about the mode of operation, safety or connection of the
LED-strip, you must contact your dealer, the manufacturer or a qualified person.
» Also please note the additional safety advice in the individual chapters of this
operating manual.
» Never immerse the product into water or other fluids and do not attach the
LED-band onto wet or electricity conducting underground.
» Do not connect the LED-strip with different lighting systems.
» Do not operate the product if it is covered.
Installation and Application
»
Remove the bedlight from the packaging. The product may only be used
outside of the package and unfurled.
»
Clean the area to which the bedlight is to be attached. These areas must be
sufficiently even, clean and free from grease to ensure optimum adhesion of
the LED-strip.
NOTICE:
Follow the safety instructions found in chapter “Cleaning”.
»
The LED strip of the bedlight can be shortened approx. every 10 cm, but
can not be extended. Never shorten the LED strip while it‘s connected to
electricity.
»
To shorten the LED strip cut the strip with scissors at the copper lines as
seen in Fig. 1.
Fig. 1
D
EU
TS
C
H
ENG
LI
SCH
FR
A
NZÖ
SI
SC
H
