X4-Life 701408, Инструкция по эксплуатации

Страница: 31 / 42

31
The product is powered by electric current. Therefore please pay special attention
to the following when installing or handling the cable:
• The installation may only be performed by qualified personel who is familiar
with the connected regulations (VDE) and risks!
• The LED-Floodlight is contructed according to protection class I and must be
protected on the sub-distribution board by a 10/16 A-fuse. An earth fault circuit
interrupter must be installed before this (FI protective switch).
• Cables must never be crushed, folded over, damaged by sharp edges or
subjected to any other kind of mechanical stress.
• Avoid exposing cables to excessive heat or cold.
Cleaning and maintenance
DAnGER
Always use a soft, dry and lint-free cloth to clean the unit’s
exterior. If the device is extremely dirty you can use a soft cloth,
dampened with water or a mild cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol, petrol or thinners)
as these could damage the controls, casing or any markings and labels found on
the device.