12
Body fat scale
➝
Open the battery compartment on the
bottom of the unit and insert the battery
➝
Make sure to insert the batterie with the
correct polarity
➝
Close the battery compartment.
➝
Put the scale on a flat, horizontal surface
and go up to the scale barefooted.
The scale must only be placed on solid
surfaces, for example, not on carpet;
otherwise the results will be incorrect.
➝
The scale is set by default to kg. You can
change the unit as desired by pressing the
switch on the bottom of the scale. Thus,
let kilograms (kg), lb (pounds) or st: lb
(stone: pounds) set.
Getting weighed
➝
Go up to the middle of the scale and the
display will show your weight. For measu-
ring the body fat or water content please
stand on the scale barefooted – otherwise
no or wrong body analysis is performed.
SET PERSONAL DATA
➝
The scale has the optional function of
weighing and finding out your water and
body fat percentage, to do this you must
first insert and program in the memory
the following data: sex ,age and height.
The scale has a memory with capacity for
10 people.
➝
To insert the data in the memory follow
the next steps.
➝
Press ON button „SET“ and wait for the
display shows „ 0.0“ . Press „SET“ again,
one of the programmed memories
between 01 and 10 it will appear flashing
on the display. Also, the symbol of man or
woman and the word „USER“ will appear
on the display. Next and using the setting
buttons „
~
„ or „
„ search „01“ to intro-
duce the data of the first person and press
„SET“ to memorize. The symbol of man or
woman will appear flashing.
➝
Using the same buttons „
~
„ or „
„, set the
age increasing or decreasing the numbers
and press „SET“ to memorize. It will flash
a certain height in centimeters (cm) or feet
and inches, depending if you have chosen
the weight in kg (kilograms) or lb (pounds)
or st:lb (stone:pounds).
➝
The data of the first person are already
memorized. Wait for the digits „0.0“
appear on the screen and then the scale
switches off.
➝
Repeat all the process with all the people
that are going to use the scale.
Getting weighed and obtaining water
and body fat percentage
Once all the data have been introduced
into the memory, to find out your water
and body fat percentage, follow these
steps.
Press and release the „SET“ button and
wait for the digits „0.0“appear on the
display. Press „SET“ again, and next use
the „
~
„ or „
„ pushers until your memory
number appears on the screen. Wait for
the digits“0.0“ appear on the screen.
Get on the scale and remain still. First your
weigh will appear flashing on the screen.
Wait a few seconds. Then, your body fat
percentage will be shown next to the
symbol
with one of the following
indications:
• UNDERFAT
• HEALTHY
• OVERFAT
• OBESE
Next, it will appear the water percentage
with the symbol
. Both percentages
