X2E XORAYA ML-Z7, Руководство пользователя

Страница: 113 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
113
5.5.3 Signal configuration
In this section, you configure signals and define signal processing and
triggers.
Messages and signals
The payload of a message consists of signals with
variable bit length.
Messages and signals are assigned names for easier
handling.
Settings:
1 Add signal manually 4 Refresh signals
2 Edit signal 5 Configured signals
3 Delete signal 6 Signal selection
Select the desired signals from (6) to add them to the list of configured
signals (5) . (
➔
Signal selection)
This list is stored temporarily or permanently on the datalogger.
Click (1) or right-click anywhere in the list (5) to add additional signals
manually.
Click (2) or right-click a configured signal in the list (5) to edit this signal.