X2E Automotive Ethernet Converter, Руководство пользователя, Страница: 11 / 22

User Manual Automotive Ethernet Converter
11
Installation
Mounting
CAUTION
Device damage due to overheating
Overheating may result in malfunction or destruction of the converter.

Do not operate the converter outside the specified temperature
range.

Do not operate the converter in the vicinity of heat sources.

Ensure adequate air circulation.

Do not cover the converter with other objects.

Mount the converter in such a way that it does not pose a hazard at any time.
Connecting
DANGER
Electric shock due to improper connection
Introducing the 4-mm plugs of the supplied connection cable into low-volt-
age sockets can be fatal.

Never introduce the 4-mm plugs into low-voltage sockets.
CAUTION
Device damage due to wrong power supply
A wrong power supply can result in damage or destruction of the converter.

Only connect the converter to power supplies that correspond to the
technical specifications.

Pay attention to the correct polarity when connecting.
Disconnect service interface during standard operating mode
Make sure that the service interface (C) is disconnected in standard operat-
ing mode. Pull the plug if necessary and connect it again before changing
the configuration or updating the firmware.