3
2
Direct Library Code Entry
To enter Codes directly from Library Code
Table.
1. Press and hold the Power and Mute buttons
simultaneously until the red LED remains on.
2. Release the buttons.
3. Enter the 3 digit code for your brand of TV
from the Library Code Table by using the V-,
Ch+, and V+ buttons. Use the V- button to
enter the first digit, use the Ch+ button to
enter the second digit and use the V+ button
to enter the third digit.
E.G. to enter code 013, don’t press V-, press
Ch+ once, and press V+ three times. The red
LED blinks off with each keypress.
4. Press the Mute button to save the code.
Note: for a valid code, the red LED turns off.
For an invalid code, the red LED blinks
rapidly for three seconds before going off.
5. Direct code entry is now complete.
Write your code below in case you forget it.
INTRODUCTION
Your TV Buddy
™
Universal TV Remote controls
most all TV brands presently available. It also
includes a handy bottle opener and corkscrew so
you can enjoy a beer or a glass of wine while
watching your favorite movie.
SET UP INSTRUCTIONS
Install 2 AAA alkaline batteries in the battery
compartment on the back of the remote.
Look up the 3 digit code for your brand of TV
from the Code Table and install it into the remote
as follows:
