10
2.3
Settings
To enter setup mode, press the settings button for two seconds.
“SET” will appear at the top center
of
the display. Press the settings button for two seconds in any settings interface to exit setup mode and
return to the main interface.
2.3.1
Alarm Options
Enter setup mode. The flashing icon at the top left of the display indicates which alarm mode (audible
or vibrating) is being altered. Press the power button to toggle alarm on or off; press the settings
button to save changes and move onto the next alarm mode.
2.3.2
Threshold Settings
Enter setup mode and press the settings button three times. “AL”
will flash at the top of the display.
Press the power button to enter threshold settings setup. The threshold value being altered will start
flashing; press the power button to choose values, and press the settings button to apply changes.
2.3.3
Dose Clearing
Enter setup
mode and press the settings button four times. When “CLR” is displayed, press and hold
the power button for two seconds to enter dose clearing mode. When “YES” is displayed, press the
power button for two seconds to confirm.
When “DONE”
is displayed, the dose has been cleared.
Press any button to return to the main interface.
