- 11 -
TROUBLESHOOTING
ISSUE
POSSIBLE SOLUTIONS
Unit does not
have power
• Ensure the power cord is securely attached to both
the unit and the outlet and that the unit is powered
on at the back of the unit.
• Ensure that the outlet is functional.
• Check the fuse in the back of the unit to see if it is in
good working condition. If not, replace fuse.
S-E Error
• Ensure the soldering iron is securely plugged into
the back of the unit.
• Ensure the heating element/tip cartridge is securely
seated into the soldering iron.
• The heating element/tip cartridge may need to be
replaced
Tip is not
heating up as
expected
• Ensure the soldering iron is securely plugged into
the back of the unit.
• The soldering tip could be oxidized, it is important
to always tin your tip and keep it clean. See Tip
Maintenance section of manual.
• The heating element/tip cartridge may need to be
replaced
• Unit may need to be calibrated - see Calibration
section of manual
