manualshive.com logo in svg

X-Tronic 4010-PRO-X, Инструкция по эксплуатации

Поделиться
Скачать
X-Tronic 4010-PRO-X Скачать руководство пользователя страница 13

- 11 -

REPLACING THE FUSE

Fuse

Extra Fuse 

Compartment

Fuse Clip

Fuse 

Compartment

1.  Unplug the power cord from the outlet.

2.  Remove the fuse compartment by pressing a flat head screwdriver 

into the divot just inside the power socket under the fuse 
compartment.

3.  The fuse that is in use will be in the fuse clip, the extra fuse is 

below it. If the fuse is damaged, replace it with the new fuse.

4.  Insert the fuse compartment back into the unit.

TROUBLESHOOTING

ISSUE

POSSIBLE SOLUTIONS

Unit does not 
have power

•  Ensure the power cord is securely attached to both 

the unit and the outlet and that the unit is powered 
on at the back of the unit.

•  Ensure that the outlet is functional.

•  Check the fuse in the back of the unit to see if it is in 

good working condition. If not, replace fuse.

S-E Error

•  Ensure the soldering iron is securely plugged into 

the back of the unit.

•  The heating element may need to be replaced

Tip is not 
heating up as 
expected

•  Ensure the soldering iron is securely plugged into 

the back of the unit.

•  The soldering tip could be oxidized, it is important 

to always tin your tip and keep it clean. See Tip 
Maintenance section of manual.

•  The heating element may need to be replaced

•  Unit may need to be calibrated - see Calibration 

section of manual

Содержание 4010-PRO-X

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды