- 5 -
FUNCTION SETTINGS
FAHRENHEIT / CELSIUS CONVERSION
1. Ensure the soldering iron is in the soldering iron holder.
2. Turn on the power switch.
3. Press and hold the aluminum temperature adjustment knob for
about 2 seconds. The display will show “F” for Fahrenheit display
mode.
4. Turn the aluminum temperature adjustment knob to set the “F”
(Fahrenheit) or “C” (Celsius) display.
5. Wait for approximately 4 seconds and the program will save and
exit on it’s own.
SLEEP FUNCTION
When the soldering iron is placed in the holder, the iron will go
into sleep mode after 5/10/30 minutes (depending on what you
have the sleep timer set at). The display will show “SLP” on the
bottom display to signify this and the temperature of the soldering
iron will ramp down to 194°F / 200°C (shown on the top display).
When the soldering iron is removed from the holder to use again,
the temperature of the soldering iron will ramp back up to the
temperature it was previously being used at within 5-10 seconds.
IMPORTANT:
If you have this set to L00 the Sleep Function will NOT
activate.
Setting the Sleep Timer
1. Ensure the soldering iron is in the soldering iron holder.
2. Turn on the power switch.
3. Press and hold the aluminum temperature adjustment knob for
about 2 seconds. The display will show “F” for Fahrenheit display
mode.
4. Press the temperature adjustment knob one more time and the
display will show “L10”. This indicates that the unit is set to go into
sleep mode with 10 minutes of inactivity.
5. You have four options for how long the unit sits idle until the sleep
timer kicks in:0, 5, 10 or 30 minutes. If you select L00, the unit will
NOT go into sleep mode (this can reduce the life of your soldering
iron and heating element).
6. Adjust the temperature knob to change the sleep time. When
the display indicates the sleep time you would like, wait for
approximately 4 seconds and the program will save and exit on it’s
own.