X
-
T
R
E
M
E
user’s guide
X
-TREME
via Monti Urali, 31 - 42029 Reggio Emilia (Italy)
●
tel.+39 0522 557735
●
fax.+39 0522 393733
●
e-mail: [email protected]
System configurations.
Modular Line
loudspeakers can be used with
analog controllers by which it is possible to set
a specific equalization, X-over frequency and
limiter functions. More complex set-up could
be obtained by the use of DSP.
Modular Line
systems
can be
controlled by Digital Speaker
Management System
XT266
or by any
professional digital controller. Whatever
controller you use, it is important that limiters
are set with very fast attack to prevent
amplifier clipping. This fact demands that
limiter threshold of the control device is
consistent with amplifier sensitivity. Such a
working system, with power amplifiers of
recommended output power and used by
technical specialist, appears to be protected
from “over-utilization”. We suggest to refer to
used controller manual to have more
informations about setting of limiter threshold.
Modular Line
loudspeakers, controlled by a
properly set controller, show an essentially
linear on-axis frequency response. About
XTSQ15
e
XTSQ18
subwoofers, we suggest
to use a X-over frequency between 90 Hz and
110 Hz. Whenever it is necessary, you can
utilize equalizations for compensating
particular environmental acoustical conditions.
Examples:
Fig. 9. Configuration “Sat+Sub” with 2 XTQ15 loudspeakers and 2 XTSQ18 subwoofers.
XTQ15 XTQ15
XTSQ18 XTSQ18
XT 2000
XT 3400
XT-ST100
XT-ST100
Содержание XTQ12
Страница 1: ...X TREME MODULAR LINE User s Guide...
