Page10
Operation Instructions
*Be sure all assembly is complete before riding.
*Disconnect charger from scooter and store properly.
Your scooter is operated using a foot push button. To ride the scooter, simply
set on the scooter, turn the speed switch to the desired speed and using your
right foot, push the foot button located on the right footplate. To stop the
scooter, simply release the foot button.
1. Locate the slow/fast switch located on the scooter, move the switch to
the desired position.
2. To accelerate forward, use your right foot to press the foot button on
the right footplate.
3. To stop, simply release the foot button.
4. To park the scooter, keep the slow/fast switch in the middle (neutral)
position.
Charging Instructions
***WARNING***
An adult should perform charging of the scooter.
TO AVOID
ELECTRIC SHOCK, NEVER ALLOW CHILDREN TO HANDLE THE
CHARGER OR ATTEMPT TO PLUG THE BATTERY CHARGER INTO A
WALL OUTLET!
1. Locate the enclosed battery charger. Plug the charger into a wall
outlet.
2. Locate the charger socket on the scooter.
3. Plug the battery charger into the socket on the scooter. Depending on
the charge remaining in the battery, charging time will vary. Normal
charging time will be 6-8 hours.
Do not allow the charger to charge the batteries for more than 20 hours as
this may damage the batteries.
IMPORTANT SAFETY GUIDELINES
Keep hands, face, feet and hair away from all moving parts.
Do not touch the motor or wheels while they are rotating.
Adult supervision during operation is required at all times.
The scooter is designed for flat terrains only. For safety purposes,
never allow children to operate the scooter in hilly areas.
When not in use, ensure the scooter is turned off and stored in an
enclosed dry area away from moisture or rain.
This product is ELECTRIC! DO NOT ride this product in wet
conditions, puddles or rainy weather.
You
MUST
charge completely prior to initial use.
Charge immediately after each use, before prolonged storage and at
