6
PACKAGE CONTENTS
Your X-Treme™ A-Blaze Signature Series XG-575DS Gas Scooter comes with the following
items in the box:
Please locate all of the following:
1.
The XG-575DS Gas Scooter
2.
Allen Wrench
3.
Owner’s Manual
GETTING STARTED
Please read and understand these instructions and the OPERATING PROCEDURES section
prior to starting or riding your XG-575DS!
Unfolding
1.) Carefully remove the XG-575DS from the box.
2.) To unfold the XG-575DS, begin by pressing down on the FOLDING HANDLE with one
hand, (Fig. 1) while gently pulling up on the handlebar post with the other (Fig. 2).
3.) Fully extend the handlebar post to the upright position until
you feel the mechanism lock into place (Fig. 3).
4.) Detach the handlebar from the post and mount the handlebar
on to the post using the 4 bolts provided. Ensure the
handlebars are in the center.
5.) Adjust the Gas and Brake Levers using the provided Allen
Wrench, loosen the tension bolt and adjust the levers to a
comfortable position (Fig. 4 next page).
**BE CAREFUL NOT TO PULL ON THE CABLES!!!
Fueling
This is a 2-stroke engine. Always run the engine using fuel
mixed with 2-cycle engine oil. Not mixing fuel/oil can destroy the
engine.
PLEASE READ OPERATING PROCEDURES BEFORE FUELING!!
6.) Mix fuel (unleaded) and 2-cycle engine oil in separate
container. Use a 32:1 ratio of gasoline to premium synthetic oil or
a synthetic blend of two-cycle oil. Make sure the fuel is well
mixed by shaking the container.
7.) Make sure that the engine is off!