X-TREME XFit ELITE, Руководство пользователя

Страница: 5 / 16

PREPARATION: Before assembling, make sure that you will have enough space around the item;
Use the present tooling for assembling; before assembling, please check whether all needed parts
are available. It is strongly recommended this machine to be assembled by two or more people to
avoid possible injury.
ASSEMBLY INSTRUCTION
Step 1:
Fix the Front stabilizer (2) and
Rear stabilizer (3) to the Main
frame (1) with Allen bolt (17),
Spring washer (18) and Arc
washer (20).
Step 2:
A: Insert the Post shield (58) into
the Handlebar post (4).
B: Connect the Sensor wire (60)
well with Extension wire (59) and
then connect the Tension wire from
Tension controller (57) well with
Tension controller cable (61) as
Picture A shown. Finally fix the
Handlebar post (4) to the Main
frame (1) with Allen screw (53),
Spring washer (18) and Flat
washer (12) and then slid down
the Post shield (58).