X-TREME XA-112, Руководство по эксплуатации продукта

Страница: 19 / 26

Page19
STARTING THE ENGINE
Always us the following procedure below when starting your XA-112:
WARNING – NEVER RUN THE ENGINE IN AN ENCLOSED AREA. EXHAUST
EMISSIONS ARE DANGEROUS AND CAN LEAD TO DEATH .
Starting using the Electric Start
Ensure the ATV is on level ground and the parking brake is engaged
1. Insert the key into the ignition and turn to the ON position
2. Depress the hand brake
3. Press the electric start button while slightly turning the throttle
4. Once the ATV is running, release the starter button.
NOTE: Do not use the electric starter button for more than 5 seconds at a time.
Release for at least 10 seconds before pressing again.
5. When starting and warming up, be sure to maintain the throttle slightly.
6. Allow the engine to warm up for a few minutes before riding.
Once the ATV is properly started and has warmed up, release the parking brake and with
both hands on the handlebars, depress the throttle slowly to begin forward movement.
To slow down, release the throttle and depress both the left and right hand brakes to come
to a full stop.
Practice braking to ensure proper pressure to come to a full and safe stop. Never
depress both brakes strongly as it may lock up the wheels and reduce control of the ATV.
To PARK the ATV, release the throttle completely. Come to a complete stop and turn the
ignition to the OFF position. Pull the hand brake towards the rider and press the button
down to engage the parking brake.
18