X-TREME 6kVA Скачать руководство пользователя страница 36

Xtreme Power Conversion Corporation

TX90 6kVA & 10kVA User’s Manual

Page 36

Uninterruptible Power Supply

Appendix A: T90-EBP920, EBP940, EBP960 User Guide

Important Safety Instructions (Save These Instructions)

This manual contains important instructions that should be followed during installation and maintenance of the 

battery bank and batteries.

An Important Notice

•  This battery bank is connected to an UPS. There will be over 240 DC voltage at the output terminals if the 

UPS or DC breaker is turned on.

•  Do not try to repair the unit yourself, contact your local supplier or your warranty will be void.

•  To eliminate any overheating of the battery bank, keep all ventilation openings free from obstruction and 

do not place any foreign objects on top of the battery bank. Keep the battery bank 20 cm away from the 

wall. 

•  Make sure the battery bank is installed within the proper environment as specified (0-40°C and 30-90% 

non-condensing humidity).

•  Do not install the battery bank under direct sunlight. Your warranty will be void if the batteries fail due to 

overheating.

•  This battery bank is designed for indoor use only.

•  This battery bank is not designed for use in dusty, corrosive, and salty environment. 

•  The warranty for this battery bank will be void if water or other liquid is spilled or poured directly onto the 

battery bank. Similarly we do not warrant any damage to the battery bank if foreign objects are deliber

-

ately or accidentally inserted into the battery bank enclosure. 

•  The battery will discharge naturally if the system is unused for a period of time.

•  It should be recharged every 2-3 months if unused. If this is not done, then the warranty will be null and 

void. During normal operation, the batteries will be automatically remained in charged condition.

•  Servicing of batteries should be performed or supervised by trained personnel with knowledge of batter

-

ies and the required precautions

•  When replacing batteries, replace with the same quantity, type & capacity.

CAUTION 

– Do Not Dispose of Battery or Batteries in an open fire. The Battery May Explode.

CAUTION 

– Do not open or mutilate the batteries. The electrolyte from the batteries is toxic and harmful to the 

skin and eyes. 

CAUTION

 – Risk of Electric Shock – Battery Circuit is not isolated from AC, hazardous Voltage may exist between 

battery terminals and ground. Test before touching with bare hands.

CAUTION

 – A Battery can present a Risk of Electrical Shock and High Short Circuit Current.  The Following Precau

-

tion Should be Observed When Working on Batteries:

A. 

Remove watches, rings, or other metal objects.

B. 

Use tools with insulated handles.

C. 

Wear rubber gloves and boots.

D.  Do not lay tools or metal parts on top of batteries.

E. 

Disconnect charging source prior to connecting or disconnecting battery terminals.

Содержание 6kVA









































Отзывы: