or not, all packets will not take the VLAN tag; If enable the DiffServ, all
packets will only take the DiffServ value.
6) One must to notice, enable the VLAN ID Check Enable that is default, If
enable it, the gateway will match the VLAN ID strictly. When others' VLAN
ID not matches with us, the packets will discard. Contrarily, the gateway
will accept the packets with the distinct VLAN ID.
7) You must gain the IP with the Static mode when you set VLAN, otherwise
can't gain the IP in the VLAN and also can not dial with point to point.
5.3.2.4. Service Port
You can set the port of HTTP/RTP by this page.
SERVICE PORT
Field name
explanation
HTTP Port
set web browse port, the default is 80 port
，
if you want
to enhance system safety
，
you'd better change it into
non-80 standard port
；
Example: The IP address is 192.168.1.70. and the port
value is 8090, the accessing address is
http://192.168.1.70:8090
RTP Initial Port
Set the RTP Initial Port. It is dynamic allocation.
RTP Port Quantity
Set the maximum quantity of RTP Port, the default is
200.
Notice:
1
）
You need save the configuration and reboot the gateway after set this
page.
2
）
If you modify the port of Telnet and HTTP, you would better set the value
more than 1024 because the port value less than 1024 is system port
reserved.
3
）
if you set 0 for the HTTP port, it will disable HTTP service.
5.3.2.5. DHCP SERVER
